| Type of engine | Servo motor with position encoder on plastic worm cogwheel |
| Type of positioner | Servo driver positioner with sun arc logic function calculation |
| Type of charging circuit | / |
| Type of timer | Real time timer with calendar |
| Backup batery | Backup for timer, position and data |
| Internal power batery for return at evening | / |
| Type of communication interface | RS232 interface to PC |
| Seting changing posibility via PC | Yes, Earth's hemisphere, time |
| Monitoring posibility via PC | Yes, power supply voltage, positon, sun time |
| Turn on position sent from PC | Yes, it turn on position sent from PC, also all other setting can be setted with string sent from PC |
| Upgrading posibility via PC | Yes, firmware via PC with special upgrade program |
| Options | / |
| Type of backstructure clamp | Clip, press and stick - 4 pcs |
| Operating protocol | MSCS (Motorized Solar Calculation System) |
| Horizontal turning | 100°, software and hardware limit |
| Inclination (motor elevation) | 75° |
| Shaft diameter | Ø40 mm (steel) |
| Final stage of cogwheel | plastic worm wheel |
| Turning speed | 1.33°/s ±25% @17V & @100W sol. cell & @-10°C |
| Motor supply from solar cell | from 8 to 43VDC |
| Battery hysteresis of charging | / |
| Load hysteresis of discharging | / |
| Maximum charging current | / |
| Consumption in idle state | 20 mA ±25% @ 12V |
| Consumption during operation | <200 mA ±25% @ 50W sol. cell |
| Initial current consumption | 350 mA @ t<0,25s typically |
| Operating temperature | -25°C +70°C |
| Operation at humidity | 0% to 100% of relative humidity |
| Type of solar connectors | TYCO SOLARLOK |
| Connection | 1 x pair Cu conductor cables with internal cross-section 1mm2 |
| Limit EAST-WEST | end switches, programmable limit |
| Turning time interval | 1-15 minutes adjustable |
| Maximum working torque of output shaft | 35.9 Nm @17V & @0.5°/s (measured) |
| Destructive torque of output shaft | >100 Nm |
| Estimated service life | 20,000 turns of 180° (90°E + 90°W), or 10 years |
| Arm width | 0,6 m |
| Motor shaft length | 560 mm |
| Max dimen. of a solar cell | 1m x 0.6m of aluminium structure, made for panels with up to 0.6m2 in area |
| Max. weight of a solar cell | 10kg under the condition that the solar cell is turning through the centre of gravity |
| Dimensions of a packed motor | 1175(L) x 135(W) x 200(H) mm |
| Product weight | 6,5 Kg |
| Max. safe wind speed | <160km/h |
