Lorentz Solar Submersible Pump | 0-60m Lift-up | 2700 lt/h

€1,450.00

Lorentz Solar Submersible Pump | 0-60m Lift-up | 2700 lt/h 's features;

PS1200 HR-14 is a submersible pump for 48 - 72 V systems (4 - 6 solar modules or batteries in series). Same motor and controller for solar direct or battery operation.

PS1200 is more powerful, energy efficient, quieter and much more durable than other pumps in this range. Helical Rotor wet end, brushless and maintenance free.

Applications

Drinking water supply
Livestock watering
Pond management
Irrigation

PS1200	HR-14
Lift Up	80-160 m
max. Flow Rate	2700 l / h, 2,7 m³ / h
max. Wirkungsgrad	65 %
Solar Operation	Nominal Voltage 72 - 96 V DC Max. System Voltage 200 V DC
PV Array	350 - 1200 Wp
Battery	Nominal Voltage 72 - 96 V DC

Controller PS1200

Controlling of the pump system and monitoring of the operating states
Mounted at surface (no submerged electronic parts)
Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
Automatic reset 20 minutes after well probe turns pump off
Protected against reverse polarity, overload and high temperature
Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
Solar operation: integrated MPPT (Maximum Power Point Tracking)
Battery operation: low voltage disconnect and restart after battery has recovered
Max. efficiency 92 % (motor + controller)
Enclosure: IP 54 (sealed, weatherproof)

Motor ECDRIVE 1200HR/C

Brushless DC motor
no electronics inside motor
Water filled
IP68, Pressure balanced, ultimate submersion
Dynamic slide bearings, material: carbon/ceramic
Wetted material: stainless steel(AISI 316) POM, rubber, cable drinking water approved

Pump End "PE"

High life expectancy
Stainless steel none return valve
Dry running protection
Material stainless steel "ASI 316", rubber

HR- Helical Rotor Only

Helical rotor pump (positive displacement pump)
Two main parts only: stator and rotor,field serviceable
Stator: geometry made of abrasion resistant rubber
Rotor: stainless steel, hard chrome plated, abrasion resistant
More resistant to damage by sand than other pump types
Self-cleaning

Temperature Limits

Pump End, Motor: water temperature +40° C (+104° F).
Controller: ambient temperature -30° C to +55° C (-22° F to +131° F)

Mechanical Data

	Measure					Package Measure
Pump End (PE) Motor + PE	L [mm]	A [mm]	B [mm]	D [mm]	S	Dimension [mm]	Net Weight [kg]	Gross Weight [kg]
HR-14	771	586	185	96	G1¼"	850 x 160 x 150	11,5	12,3
Controller Type
PS1200						450 x 250 x 240	4,5	5,3

Direct Solar Operation [420, 1200 Wp], Compare: Fixed Array vs. Tracking Array

Lift Up [m]	10		15		20		30		40		50		60
Tracking Sys	-	x	-	x	-	x	-	x	-	x	-	x	-	x


Solar module [ Wp], Solarisation = 6 kWh/m²/day	Flow Rate [m³ / day]
Cable [mm²]	4,0
350	19,0	26,0	18,0	24,0	15,0	20,0	10,0	14,0
max. Flow Rate [l / min]	47,0		40,0		36,0		30,0
420	22,0	27,0	19,0	25,0	17,0	24,0	12,0	17,0
max. Flow Rate [l / min]	43,0		42,0		38,0		34,0
480					19,0	27,0	15,0	19,0	10,0	14,0
max. Flow Rate [l / min]					42,0		36,0		28,0
660					23,0	29,0	18,0	24,0	14,0	19,0	11,0	15,0
max. Flow Rate [l / min]					43,0		42,0		40,0		38,0
720							20,0	26,0	18,0	25,0	14,0	19,0
max. Flow Rate [l / min]							44,0		43,0		39,0
840							22,0	29,0	21,0	28,0	16,0	23,0
max. Flow Rate [l / min]							45,0		43,0		39,0
1000									22,0	28,0	18,0	25,0	14,0	21,0
max. Flow Rate [l / min]									52,0		39,0		38,038,0
1200											20,0	27,0	16,0	23,0
max. Flow Rate [l / min]											39,0		38,0