Lorentz Solar Submersible Pump | 0-80m Lift-up | 800 lt/h

€1,450.00

Lorentz Solar Submersible Pump | 0-80m Lift-up | 800 lt/h 's features;

PS600 HR-04 is a submersible pump for 48 - 72 V systems (4 - 6 solar modules or batteries in series). Same motor and controller for solar direct or battery operation.

PS600 is more powerful, energy efficient, quieter and much more durable than other pumps in this range. Helical Rotor wet end, brushless and maintenance free.

Applications

Drinking water supply
Livestock watering
Pond management
Irrigation

PS600	HR-04
Lift Up	0-80 m
max. Flow Rate	800 l / h, 0,8 m³ / h
max. Wirkungsgrad	60 %
Solar Operation	Nominal Voltage 48 - 72 V DC Max. System Voltage 150 V DC
PV Array	300 - 480 Wp
Battery	Nominal Voltage 48 V DC

Controller PS600

Controlling of the pump system and monitoring of the operating states
Mounted at surface (no submerged electronic parts)
Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
Automatic reset 20 minutes after well probe turns pump off
Protected against reverse polarity, overload and high temperature
Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
Solar operation: integrated MPPT (Maximum Power Point Tracking)
Battery operation: low voltage disconnect and restart after battery has recovered
Max. efficiency 92 % (motor + controller)
Enclosure: IP 54 (sealed, weatherproof)

Motor ECDRIVE 600HR/C

Brushless DC motor
no electronics inside motor
Water filled
IP68, Pressure balanced, ultimate submersion
Dynamic slide bearings, material: carbon/ceramic
Wetted material: stainless steel(AISI 316) POM, rubber, cable drinking water approved

Pump End "PE"

High life expectancy
Stainless steel none return valve
Dry running protection
Material stainless steel "ASI 316", rubber

HR- Helical Rotor Only

Helical rotor pump (positive displacement pump)
Two main parts only: stator and rotor,field serviceable
Stator: geometry made of abrasion resistant rubber
Rotor: stainless steel, hard chrome plated, abrasion resistant
More resistant to damage by sand than other pump types
Self-cleaning

Temperature Limits

Pump End, Motor: water temperature +40° C (+104° F).
Controller: ambient temperature -30° C to +55° C (-22° F to +131° F)

Mechanical Data

	Measure					Package Measure
Pump End (PE) Motor + PE	L [mm]	A [mm]	B [mm]	D [mm]	S	Dimension [mm]	Net Weight [kg]	Gross Weight [kg]
HR-04	780	595	185	96	G1¼"	850 x 160 x 150	11,2	12,0
Controller Type
PS600						450 x 250 x 240	4,5	5,3

Direct Solar Operation [300, 350, 420, 480 Wp], Compare: Fixed Array vs. Tracking Array

Lift Up [m]	30		40		50		60		70
Tracking System	-	x	-	x	-	x	-	x	-	x


Solar module[ Wp], Solarisation = 6 kWh/m²/day	Flow Rate [m³ / day]
Cable [mm²]	4,0								10,0
300	6,2	8,2	5,4	7,4	4,8	6,3	3,7	5,3	3,0	4,2
max. Flow Rate [l / min]	14,0		13,0		13,0		11,0		7,0
350			6,5	8,3	5,5	7,5	4,8	6,9	4,1	5,8
max. Flow Rate [l / min]			13,0		13,0		11,0		10,0
420					6,0	7,9	5,4	7,2	4,8	6,4
max. Flow Rate [l / min]					13,0		11,0		10,0
480							7,0	10,0	5,5	7,4
max. Flow Rate [l / min]					7,6		19,0		13,0
							Cable 10 mm²